Clik here to view.
Ruckus wireless – Stuck in provisioning
Sometimes when we deploy Ruckus APs remotley over a VPN, they will come up in the Zondirector but will stay on provisioning. then reboot after a bit, and then come back in as provisioning. The reason...
View ArticleClik here to view.
Dynamic Vlans with Ruckus wireless and Microsoft NPS
Hello all, I recently was given a strange task. An office needs to have everyone in there office on different vlans. The reason for this is that each user is developing software and they need to test...
View ArticleClik here to view.
Enabling LLDP in Ruckus wireless
Ruckus has finally built in the ability to use LLDP to find Access points. I was so excited when I found this out, I installed the newest firmware and was ready to be blown away – and alas.. no LLDP....
View ArticleClik here to view.
Ruckus Zonedirector LDAP setup
Within ZD we might need to enable LDAP look ups to facilitate in using Active Directory logins to the firewall for administration, or authentication for Guest pass creation/ZeroIT. Recently I had to do...
View ArticleRuckus ICX untagged vlan port config
I have been working with Brocade ICX and now Ruckus ICX for a few years now. They are awesome switches. I was asked a couple of times about something that was happening when someone would try and set...
View ArticleRuckus ICX Radius logins
I refer back to these commands a lot and thought they might help someone else. This will allow the Ruckus or Brocade ICX switches to authenticate to a radius server for logins to the device. aaa...
View ArticleClik here to view.
Ruckus ICX 7250 and Mitel 6000 Headset Power issues
Currently I am working with a client who has lots of Ruckus ICX 7250 PoE+ switches. These have been great switches, lots of features such as: large PoE budget, 10G, VRF/Routing capability. Recently the...
View ArticleClik here to view.
Ruckus ICX 7250 VRF setup/config
This entry details the config for setting up and deploying VRFs on a Ruckus ICX 7250. Recently I had an issue where a client had a new ISP and that ISP gave them the Customer WAN /30 subnet, then...
View ArticleRuckus ICX VLAN range command
Thought this might be useful for anyone who needs to make a lot of changes quickly to many vlans. In ICX vlans, and vlan interfaces (routing interfaces) are different. In this example I will show how...
View ArticleClik here to view.
Ruckus ICX integration with Fortinac
This entry shows how I have been setting up ICX switches with Fortinac. In this scenario my Fortinac is located at 192.168.226.248, the switch is 192.168.226.53, and my SNMP community is “snmp”. I know...
View ArticleClik here to view.
Finding Transceiver info in Ruckus ICX switches
I needed to find out what type of Optic was installed into a switch, and if it read up correctly. In most vendors its “show interface transceivers” or some other command. I struggled to find Ruckus’s...
View ArticleRuckus ICX switching – Displaying files on USB or flash
I needed to update the firmware on a Ruckus ICX 7150, but could not remember the file name of the firmware I was updating. I looked through the commands for a dir: flash, or dir:usb and really...
View Article
